Chris Evans - Nodd

Fixing a sticky throttle controller using white lithium grease. Part Two: https://youtu.be/jMhPKJKpFB8 Thrustmaster TWCS Throttle Controller. My fancy screwdriver: Kobalt 13-in-1 Double Drive Screwdriver

zenith SSBM

Buying, unboxing, using, testing, and opening the new Smash Ultimate Gamecube Controller from Nintendo. Disclaimer: I forgot to set a reference point when recording my hand cam so the footage is horribly de-synced Additional Notes: Dashback is average and probably will carry the same issues between controllers like it always has Questions? Please Comment, or Message/Tweet me at: https://twitter.com/zenithssbm Music: "Pastel" "Lineage" "Remember" "Kingdom" Instrumentals by Homage https://www.youtube.com/homage253

lukemorse1

DO NOT USE VASELINE AT ALL! use white lithium grease or some other kind of mechanical grease. Ive been wanting to make this video for a long time but always forgot about it. Today Ill show you how to get your N64 controllers back to new and stay that way as well as preventative maintenance to keep your controller going strong for years to come. Things you will need: Tape: Any kind Sandpaper: maybe a variety from rough to fine grit A File Grease: Anything is ok as long as it isnt sticky 2 part Epoxy or Plastic Glue, JB Weld etc, not a glue that sets up soft, a glue that sets up hard. A Tooth Pick or Chopped Qtip Some Tissue or A Qtip to remove the plastic powder A Dremmel Tool or Fine Tip Drill Bit or a sharp thin knife A Corner from a desk or table or a box I have used this method for years and had great success with it. the controller lasts a long time and feels like close to or new. I have seen videos on the tape method which is a good temp fix but not perminant. give it a try for yourself and if done right, you can save your broken controller or save a few controllers from going in the trash :) Keep in mind that this is a REPAIR not a REPLACEMENT. Replacing all of the parts or some of the parts is easy and Im sure that some people will say `just buy a new joystick` or `Just buy new parts etc. This is an inexpensive way to salvage your old controller without having to buy new parts for it. I will also put annotations in the video but to also add to what I mentioned, if the 2 black cages/cradles with the gears on them inside the joystick are chewed up or worn down, you can use JB Weld on them as well to bring the shape back. once the glue is hardened, sand or file it down to a smooth texture as well, then put those back into place. This video was intended for those who like to try to bring something broken and not working properly back to life again. Downloading an N64 emulator or playing games for the N64 on your Wii with a gamecube controller or DS or downloading the roms and playing them on a pc with a ps1 controller is not a way to fix something for those who may leave a comment like that, that is just a cheap way to play the games without using the actual hardware. This video is designed to help save/salvage the actual hardware :) Also Note: This repair is not a simple 5 minute job. It will on average require you to let the parts/glue harden overnight in some cases. Patience is a virtue but if you wait it out, do it right and take your time you will have a joystick that lasts longer than time you spent to fix it for a long time

Moxen Wolf

This is the first video in my Beginner series for learning how to fly without the use of Flight Assist. This is my regiment for teaching students in Newton's Gambit ( https://forums.frontier.co.uk/showthread.php/325125-Newton-s-Gambit-(100-FAOFF-Concept-Group) ). I tend to divide beginner FAOFF skills into 5 proficiency levels. The exercises shown here in this video comprise all of the exercises for Proficiency Level #1. Update: Proficiency #2 has been released! https://www.youtube.com/watch?v=uqN_UuEYKWY Update: Proficiency #3 has been released! https://www.youtube.com/watch?v=uLlF2EATNf8 This series is not the only material on YouTube for learning FAOFF. I highly recommend looking at everything you can, especially LookInverted (CMDR Lancer's) videos on FAOFF instruction found here ( https://www.youtube.com/watch?v=JWrvKoUJOEw ). Also, don't forget to find inspiration in other Commander's skills. I can't tell you how many times I've watched YouTube videos of some of my favorite FAOFF Commanders over and over again. Inspiration is a powerful fuel. I'm looking at you Isinona! I usually assume going into Proficiency #1 that a student can "Quiet your Ship" already when in FAOFF. Essentially this is the skill to stabilize your ship, when at full stop, after being placed in a chaotic roll. This is usually a quick skill to learn and many of the videos already posted to YouTube cover how to approach this. A last note: As with anything that requires the development of skill, it is best to just do it. Most full-FAOFF Commanders, and those who aren't full-FAOFF but use it regularly, didn't have guided training exercises. Rather, they created their own exercises to develop their skills. They just stuck to it, and eventually became proficient. X52 Pro TrackIR

Geoweb35

XMedia Recode is a freeware video and audio transcoding program for Windows. Recommended upload encoding settings for Youtube: https://support.google.com/youtube/answer/1722171?hl=en For high quality Constant Quality 1 Rate Control 30000 For small/medium file size Constant Quality 18 Rate Control 24000 *************************** Subscribe for more videos ***************************

PC PAYLOAD

Thanks for taking the time to watch! Here are a couple links to purchase the Thrustmaster T.16000m FCS HOTAS I realized after uploading there were a few times I misspoke and called this the T1600 and a typo at the end of the video calling this a T.6000m. Because I uploaded this at 1080p 60fps and in a effort to save myself 4 hours, I figured a simply "Sorry, you know what I meant to say" would be good enough for you fine people :) http://www.newegg.com/Product/Product.aspx?Item=N82E16826280080&cm_re=thrustmaster_hotas-_-26-280-080-_-Product https://www.amazon.com/Thrustmaster-T-16000M-FCS-HOTAS-Controller/dp/B01KCHPRXA/ref=sr_1_2?s=videogames&ie=UTF8&qid=1477812043&sr=1-2&keywords=hotas

Scotty Kilmer

Life Hack That Will Keep Your Power Windows Working Forever. How to fix power window problems and keep them working smoothly by lubricating (life hack) DIY with Scotty Kilmer. Power window location, inspection, and lubrication. A little spray silicone applied to your power window glass can keep them working smoothly and keep them from breaking down. DIY car repair with Scotty Kilmer, an auto mechanic for the last 47 years. ⬇️Scotty’s Top DIY Tools: 1. Bluetooth Scan Tool: http://amzn.to/2nfvmaD 2. Cheap Scan Tool: https://amzn.to/2D8Tvae 3. Professional Socket Set: http://amzn.to/2Bzmccg 4. Wrench Set: http://amzn.to/2kmBaOU 5. No Charging Required Car Jump Starter: https://amzn.to/2CthnUU 6. Battery Pack Car Jump Starter: http://amzn.to/2nrc6qR ⬇️Things I used in this video: 1. WD 40 Silicone Lubricant: http://amzn.to/2idwLcu 2. Shop Towels: http://amzn.to/2jxKone 3. Common Sense 4. 4k Camera: http://amzn.to/2hZ4AxX 5. Mini Microphone: http://amzn.to/2newgV9 6. My computer for editing / uploading: http://amzn.to/2i2sKYz 7. Video editing software: http://amzn.to/2jv5Fhf 8. Thumbnail software: http://amzn.to/2k7tz6C 👉Follow me on Instagram for the latest news, funnies, and exclusive info / pics: https://goo.gl/ohy2cA 🛠Check out my Garage to see what I use every day and highly recommend: https://www.amazon.com/shop/scottykilmer ❗️Check out the Scotty store: https://goo.gl/RwhRGU 👉Follow me on Instagram for the latest news, funnies, and exclusive info / pics: https://goo.gl/ohy2cA Consider subscribing and press the bell 🛎 icon to be notified of all new videos. And remember, every day (7 days a week), I upload a new video on the Scotty Kilmer Channel: https://www.youtube.com/user/scottykilmer Also, if you like my car help, be sure to watch my live car talk show, every Thursday afternoon at 1 CST and Saturday morning at 10 AM CST on YouTube. I answer your car questions LIVE there. Just check it out at: https://www.youtube.com/watch?v=yQtdBelbqdg Scotty Kilmer is a participant in the Amazon Influencer Program. #scottycarrepair

B T

X52 Rudders and Axes switches seem to get dirty easy, and nobody wants to go out and shell another Hundy for one of these, just because of some lame chinese made potentiometer. Heres some ideas/fixes for you, if this make sense to you. See https://www.youtube.com/watch?v=JiWyMZ2kgHw followup video

Fred Garcya

Modding my TM warthog joystick for better tension/resistance and feel. The link to the original mod: https://www.youtube.com/watch?v=aBMBR8M0z2E

CRCNZ

Check out the product here - http://www.crc.co.nz/Silicone-Grease/6895-413c28ec-3760-4f84-8e19-05f717153c2a/ CRC Silicone Grease is a thin non-curing silicone grease designed for sealing, lubricating and waterproofing o-rings and other rubber and plastic parts. It insulates valves, electrical contacts, spark plugs, battery terminals and fasteners from moisture and protects against corrosion. It is resistant to oil, water and chemicals and with a temperature range of -40°C to +200°C it will not harden, freeze, dry or melt. Features & Benefits Seals, lubricates, protects, insulates and waterproofs Temperature resistant – Maintains performance level year round. Will not harden, freeze, dry or melt due to temperature fluctuations Safe on most rubber and plastics – Will not degrade seals, gaskets or plastic insulators Chemical, oil and water resistant Uses Recommended for use on plastics and rubber components O-Rings, spark plugs, fasteners, battery terminals, electrical contacts, valves, gaskets

Goatan

How to disassemble and reassemble the shaft on a T.Flight HOTAS 4 for greasing the joints to eliminate creaking. For the spring re-alignment see the below image: https://imgur.com/uSzX4XO

Maka91Productions

How To Fix Sticky or "Broken" Analog Sticks - Stick Drift Solution - Xbox One Controller The Torx Screwdriver -- http://amzn.to/1me3MFw OR http://amzn.to/1IZcfkx Compressed Air Duster -- http://amzn.to/2uDKvBx New Controller -- http://amzn.to/2skAVTm Replacement Analog Sticks (Soldering Required) -- http://amzn.to/1me3VZv Just a small tutorial on how you can easily fix sticky analog sticks on an xbox one controller. This method should similarly work for PS4 as well. You will need: - Metal tweezers to open side panels - Torx T8 Screwdriver - Q-tip dipped in water or rubbing alcohol - Broken Controller - Compressed Air, if available You want to open up the controller, take off the analog sticks, and clean any of the physical parts getting rid of any dirt. However, if there is a larger problem, such as physical damage or wiring, you will not be able to fix it. Keep in mind, this is mostly a temporary fix, and the problem may persist in a few months, as the controller undergoes fatigue after prolonged use.

Rob Allen

I had oiled my x52 because it started to creak. It made it much worse. I've fixed it now and the video describes how. Opening your stick will void its warranty, so claim on the warranty before opening

Family White Gaming

My review of the Thrustmaster T16000 FCS. In this video, I also disable the annoying orange LED.

Chris Evans - Nodd

Fixing a sticky throttle controller using silicone grease. Thrustmaster TWCS Throttle Controller. Part One: https://youtu.be/XIIRtjMR07A - SyperLube from Synco - Nyogel 767A - NyoGel 744 - White Lithium Grease My fancy screwdriver: Kobalt 13-in-1 Double Drive Screwdriver

ronin51670

I am in the process of a new two camera view video right now. Editing at this time and should be up soon. Here is a quick video for the o-ring location ---- http://youtu.be/dXBzT66tDHs This is a complete disassembly / breakdown of the thrustmaster hotas warthog joystick flight controller. Mine had HORRIBLE stiction. This video explains why this is and how to fix the problem. If you have not replaced your grease. When you take it apart for the first time it will have red grease in it. Lots of people are replacing with silicone grease but I have found that it does not hold up and you need something thicker that has a higher pressure rating. I have written multiple production experts and have found out that the grease I use is non reactive and plastic safe. It is cacium sulfonate based. the link to it will be below. USE A PLASTIC SAFE GREASE AND MAKE IT THICK. Synthetics are usually great. My Grease http://www.lewmar.com/products.asp?id=7470&lid=23641 you can find it in almost any marine store.

JustMax

★ JUSTMAX FACEBOOK: https://www.facebook.com/JustMaxGaming ★ CHECK OUT DIGITALDIGGING: https://www.youtube.com/user/DigitalDiggingNet The T.16000m FCS HOTAS Package, today we take a closer look at the Joystick and the Throttle and I will let you know if it's worth buying If you enjoyed the video please consider leaving a comment, a like and subscribe! _______________________________________________________________ ★ Buy cheap games and support the channel: https://www.g2a.com/r/maxexpertgaming ★ Facebook: https://www.facebook.com/JustMaxGaming ★ Twitter: https://twitter.com/MaxExpertGaming ★ Intro Song by: Music used: Lock & Load by Jens Kiilstofte https://machinimasound.com/music/lock... Licensed under Creative Commons Attribution 4.0 International (http://creativecommons.org/licenses/by/4.0/) ★ Music in the Video: Cold Funk - Funkorama by Kevin MacLeod is licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/) Source: http://incompetech.com/music/royalty-free/index.html?isrc=USUAN1100499 Artist: http://incompetech.com/ ★ My PC Spec's: CPU: Intel® Core™ i7-4930K @ 4.5 Ghz CPU Cooler: Corsair Hydro Series H90 GPU's: Gigabyte NVIDIA GeForce GTX 770's 4GB running in SLI Motherboard: ASUS Rampage IV Extreme, Intel® X79 Express RAM: G.Skill DIMM 16 GB DDR3-1866 Kit PSU: Corsair AX1200 1200W ATX23 HDD's: ADATA Premier Pro SP900 2,5" SSD 256 GB and a Seagate ST1000DM003 1 TB

Advance Auto Parts

http://video.advanceautoparts.com/?v=37020 Watch this video featuring products from Radiator Specialty, Permatex, Liquid Wrench, Blaster, WD-40, Valvoline SynPower, Green Grease and buy from a large selection on AdvanceAutoParts.com. More information Liquid Wrench White Lithium Grease http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_liquid-wrench-white-lithium-grease-radiator-specialty_10060336-p White Lithium Grease http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_white-lithium-grease-permatex_7160070-p Liquid Wrench Penetrant Spray http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_liquid-wrench-penetrant-spray-liquid-wrench_7040377-p Liquid Wrench Dry Lubricant http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_dry-lubricant-liquid-wrench_10057606-p Universal Chain Lube http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_universal-chain-lube-liquid-wrench_7070748-p Penetrating Catalyst http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_penetrating-catalyst-blaster_7081146-p WD40 Smart Straw 12 oz. Aerosol http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_smart-straw-12-oz-aerosol-wd-40_7070073-p Anti-Seize Lubricant http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_countermans-choice&174;-anti-seize-lubricant-permatex_7730002-p Full-Synthetic Multipurpose Grease http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_full-synthetic-multipurpose-grease-valvoline-synpower_7070009-p General Multipurpose Grease for Automotive and Industrial Use http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_general-multipurpose-grease-for-automotive-and-industrial-use-valvoline_7070010-p Synthetic Waterproof High Temperature Grease http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_synthetic-waterproof-high-temperature-grease-green-grease_7070077-p - Products featured in the video: [1] Liquid Wrench White Lithium Grease http://direct-url.com/MH5 [2] White Lithium Grease http://direct-url.com/QIv [3] Liquid Wrench Penetrant Spray http://direct-url.com/0Yj [4] Dry Lubricant http://direct-url.com/jD8 [5] Universal Chain Lube http://direct-url.com/F4G [6] Penetrating Catalyst http://direct-url.com/qah [7] Smart Straw 12 oz. Aerosol http://direct-url.com/4lF [8] Counterman"s Choice® Anti-Seize Lubricant http://direct-url.com/ntJ [9] Full-Synthetic Multipurpose Grease http://direct-url.com/sfI [10] General Multipurpose Grease for Automotive and Industrial Use http://direct-url.com/icq [11] Synthetic Waterproof High Temperature Grease http://direct-url.com/H8L

Donnies Diamond Cart

Update I just read where Logitek bought out Saitek and here is a link to the new drivers page http://support.logitech.com/en_us/downloads Also I will be doing and Update on this video now that Logitek has bought Saitek out because the new name may require a new location on your HD due to new driver signatures I created this video for those who have had problems with the Saitek drivers , there is limited information out there that shows you how to completely uninstall and reinstall the Saitek drivers ,

TerraInterstellar

Warning! I did this video very quickly and put the spring loader on backwards. It should go the opposite way. :P How to mod your T16000M to have a lower spring rate. This improves aiming accuracy and prevents wrist strain during extended periods of play of Star Citizen. The How-To starts at 0:49 Some things I should have mentioned in the video: 1) Use a small zip-tie! 2) If the joystick is too loose, don't tighten the zip-tie as much. You may go through this process several times to find what you like! 3) I did this video very quickly and put the spring loader on backwards. It should go the opposite way. :P Star Citizen fleet: http://robertsspaceindustries.com/orgs/terraint 5,000 Free Credits when you sign up for Star Citizen: http://robertsspaceindustries.com/enlist?referral=STAR-72C4-3FMW

Troy McMillan

How to video on fixing the notch at 50% power level on the Thrustmaster T-Flight Joystick

Seth Francis Sim Racing

This is a link to the eBay user who manufactures Rclube-xp/mxp as well an many other lubricants. If it is not clickable please copy and paste: http://www.ebay.com/usr/oemwholesalewh Hey sim racers, this is my first youtube video and I have decided to make it on the re-greasing process for the Logitech G27 Racing Wheel. To save time I have decided not to include the entire disassembling process, there are many videos online explaining how to remove the wheel rim and top cover. This video was really just for practice and to review the R/c Lube-XP and R/c Lube-MXP products I am using to grease the G27 moving components. In the end I found both greases to be of very high quality. I did notice an improvement in the overall feel on my G27 however this grease was actually designed for r/c applications and I believe these products will do exceptionally well in rc gearing applications as well as many other mechanical applications such as the g25/27. I currently work as a tech at a hobby shop and will be experimenting with this product for various r/c applications. In regards to the G27, I found these products provided a noticeable reduction in physical vibration when rotating the wheel. While this wont make the wheel spin more freely as that resistance is created by the motors and not the gears it will provide a smoother overall feel. The main purpose of this re-greasing was not necessarily to enhance the feel (although it definitely did) but to achieve the best possible lubrication without using any products that could potentially damage the plastic components. These products are 100% safe for plastic-plastic, metal-plastic, and metal-metal contact situations such as pinion/spur gears, r/c transmissions, and many other applications requiring plastic safe lubricants. Thank you for watching, please subscribe to my channel to see more videos to come including videos of my diy mods to my Logitech g27 pedals and shifter paddles as well as the two Fanatec wheels I will be picking up in a couple days. Also, feel free to fallow SethFrancisSimRacing on Google+.

Delta SBW

PlaytechNZ

Hey guys! I remember growing up pretty much every gamer had a joystick, but over the last 10 years or so they've become much less common! Now that space games are big again it seems like everybody is running out and grabbing the most expensive HOTAS rig they can find! This is great for people with money to burn but I wanted to show you that you don't really need to spend $$$$$ to have a good time flying round in space! I'm gonna focus this video around Elite Dangerous as that's what I have the most experience with, but I'm sure this thing would be awesome with Star Citizen and more!

Charmed Baryon

Part 1 in our two-part series on the new Thrustmaster FCS HOTAS which pairs the TWCS throttle and T16000m joystick. Since both of these products are also available separately we will focus on them one at a time, starting with Thrustmaster's new budget throttle, the TWCS.

Audiopedia

Silicone grease is a waterproof grease made by combining a silicone oil with a thickener. Most commonly, the silicone oil is polydimethylsiloxane and the thickener is amorphous fumed silica. Using this formulation, silicone grease is a translucent white viscous paste, with exact properties dependent on the type and proportion of the components. This video is targeted to blind users. Attribution: Article text available under CC-BY-SA Creative Commons image source in video

PC Games Hardware

Nachdem das lange Jahre tot geglaubte Weltraum-Genre durch Elite Dangerous und Star Citizen und von der Community finanziert eine Reanimation erhalten hat, sind Joysticks als Eingabegerät durchaus wieder interessant. Zwar gibt es für Profis einige sehr gute und sehr teure Steuerknüppel und einige sehr günstige und abgespeckte Einsteigergeräte, doch die Mittelklasse darbte bislang etwas. Hier setzt der aus Joystick und Schubreglung bestehende Thrustmaster T.16000M FCS HOTAS an, den wir uns in diesem Video einmal genauer ansehen. ▶ Mehr News bei PCGH: http://bit.ly/1cMxRj4 ▶ Channel abonnieren: http://bit.ly/1ly7w2f ▶ Helft uns mit Amazon-Käufen: http://bit.ly/1sVPN6X Für weitere Videos schaut auch mal bei unserem Kanal http://bit.ly/pcghCHANNEL vorbei oder abonniert gleich unseren Channel: http://bit.ly/pcghABO ▶ Webseite: http://www.pcgh.de ▶ Facebook: https://www.facebook.com/pcgameshardware ▶ Twitter: https://twitter.com/PCGH_Redaktion ▶ Google Plus: https://plus.google.com/116942014428901366145 ▶ Fragen per Mail: [email protected]

Matthew van der Westhuizen

Demonstration on how to disassemble, re-grease and reassemble the Thrustmaster t-16000m.

KozmykJ

Adding switches to the T16000m joystick. Part 1 Contents: Reasons, Prep, Tools, Parts, Getting it apart, Intro to pitfalls. These vids are a bit long, but there are pitfalls to be avoided when working inside this joystick. I fell into them so you don't have to ;) More details and explanations in these DCS forum threads: http://forums.eagle.ru/showthread.php?t=146102 http://forums.eagle.ru/showthread.php?t=145266

Naceo

Or as complete as I can think up. This tutorial covers: 0:21 - Control Setup Wizard 0:31 - Control Types 2:36 - My Stick 3:18 - Selecting Your Test Environment 5:18 - Sensitivity Overview 8:38 - Testing Sensitivity 12:25 - Non-Linearity Overview 14:28 - Testing Non-Linearity 18:09 - Those Other Axis Parameters 19:55 - Camera Control 20:51 - Camera Slew 23:24 - Camera Snap 24:45 - WEP Toggle With Throttle 27:23 - Other Random Necessities (I forgot the wheel brakes!) 28:34 - Exporting and Importing Configurations 29:20 - Outro Config File Thrustmaster Hotas X (Rocker Rudder): http://www.mediafire.com/download/c2t5lo0etb6fup0/General_Purpose_HTX.blk Config File Extreme 3d Pro: http://www.mediafire.com/download/q8czcmeofwc1eod/3D_Pro.blk